| ENG

Optical Lab System

Chemalux 300LAB

Product No :

Chemalux 300LAB

REQUEST A QUOTE

 

The Chemalux 300Lab System is a complete, fully computerized surfacing lab system. Every major tation (or cell) features microprocessor control and is networked to an Rx server. This technology allows critical decisions to be made ​​once, as the job is input. From that Point on, Intelligent Software Systems Automatically Establish the optimal configuration Settings and Manage Processing cycles at each Cell. Manual Intervention is Limited to loading the Lens and Pressing the Start button! Chemalux 300Lab System sets the Standard for excellence and Simplicity.
The System is 100OD Lab a modular design with an open architecture. You can add equipment piece by piece to set up your ideal full surfacing & finish lab and operate it easily and profitably along the way you expand your lab. You are completely independent!


Equipment in the Systems
LensMate Lab 2004 
Al115 Lapometer 
350 Tape Applicator 
Unity MAX Blocker, Alloy (Pin-OCF); Reclaim Unit 210, 120/60 
Contour MAX Generator, 310 Chiller, 120V / 60Hz 
Criterion MAX Surfacer, Lap Set, 636 Fin Alum , .12 incre, Cabinet, Lap 9-Drawer W / Divide 
Chemalux 100 SRAR Coater 
Chemalux 300 AR Coater


Process Flow
Job Data is entered into the LensMate Lab Software, Which Performs the Optical Calculations, assigns Tracking information, and prints a job Ticket. 
The Unity MAX Blocker Downloads Data and Bonds the job to the Lens aligned with the blocking Block Material. 
The Contour Downloads MAX Generator Generates job and the Rx Data curves and Prism, while Automatically cribbing and Safety beveling the Lens. The Contour MAX Also Will Automatically Cut a lap Tool Reports one if the host is not in inventory. 
An Appropriate Tool is selected from the lap lap Cabinet. All Oasis MAX Surfacing Systems Come Complete with a Full range of Highly Durable Finished Aluminum lap Risk quality tools no need to time and Waste Disposable Cutting tools out of range except for specials. 
The Criterion MAX Finer / Polisher download job Data, Establish PRESSURES & Cycle Times optimal for the Lens Material, and the Lens with the Automatically Process Tool Prepared lap. 
The Lens is deblocked and Cleaned surfaced. 
The Cleaned Lens is coated with the Scratch resistant Coating using SRAR Coater Model 100, and using the antireflection Coating Model 100 SRAR Coater (volume <12 pairs / day) or using Model 300 AR Coater (<35 pairs / day).

Key Features

  • Fully computerized surfacing lab - Every major station has its own onboard micro-processor control and is digitally interfaced to the host Rx computer 
  • The worlds smallest complete lab including hard coating and AR coating 
  • Surfacing system featuring advanced three-axis CNC technology 
  • Minimal human intervention minimizes exposure to error 
  • Available with either wax or alloy blocking 
  • Readily expandable to accommodate any volume 
  • Can be configured to process plastic, polycarbonate, high index, and Trivex lenses 
  • LensMate Lab software interfaces with most VCA-compliant finishing equipment

 

Customer Reviews

Sort by

Customer

Respected Sir
I hope you will fine and enjoy life. I am interested in RX Lenses surfacing Lab ( Surfacing, Polishing, Coating And Ext.) My daily requirements is 200 to 300 Lenses Per day with 70% Progressive's and 30% Others. You are requested that kindly guide me.
Regards
S.Nadeem
Namal Trader
Pakistan
Whatsapp +923339190007
Email: ufrpwr0007@gmail.com